Cam Rack & Roller Pinion CRA&CPA / CRC&CPC series
The TCG Cam Rack & Roller Pinion achieves light rotational-to-linear motion transmission through rolling contact between the rollers of the meshed pinion and the rack tooth surface.
This mechanism eliminates backlash in the meshing area by adjusting the preload.
The rolling contact also minimizes wear and tear via metal-to-metal collision, resulting in low wear/dust and easy maintenance.
Aside from these, its dedicated connection jig enables high-precision rack splicing, making it easy to use longer racks.
TCG Cam Rack & Roller Pinion Model Calculator Technical InformationHighlights
-
Zero-Backlash
The teeth always mesh via two or three portions and eliminate backlash when rotated in one or another direction.
-
Extended length line and high speed driving
Extendable with use of the connection jig “CJ”. And, capable of high speed driving of 180 m/min or more.
-
High Accuracy
The combination of cam gear and roller pinion makes a positioning accuracy and feeding accuracy (rotation-linearity ratio) as nearly as the ball-screw.
-
Low noise・Low vibration
Rollers of Pinion supported by bearings roll smoothly on the trochoid gear. Thereby tooth striking noise, rotating noise and also vibration are reduced.
-
Low dust
Due to the smooth rotation, the structure dispenses with a least amount of heat and dust generated and cope with a clean room operation.
-
No need to maintenance for Lubricating grease
TCG series is Maintenance-free untill the rated life is achieved by applying grease only for the first time.
*Proven by our evaluation test.
(Please note that the grease life is affected by various conditions such as the usage environment.)
Model
Roller Pinion
- CPA
- 1
- 1610B
- 2
- A
- 4
- 1. Product Name
- CPA / CPC series
- 2.Frame number
-
CPA：1010B、1210B、1610B、2010B、2510B、3212B
CPC：3212A、4012B
- 3.Surface treatment
-
1：No surface treatment (standard)
2：Black chromium plating
3: Fluorine black chromium plating *Models 10 and 12 are 1 and 2 only.
- 4.Accuracy
-
A：Standard grade
B：Premium grade
Cam Rack
- CRA
- 1
- 1610A
- 2
- A
- 4
- F
- 5
- 1. Product Name
- CRA / CRC series
- 2.Frame number
-
CRA：1010A、1210A、1610A、2010A、2510A、3212A
CRC：3212A、4012A
- 3.Surface treatment
-
1：No surface treatment (standard)
2：Black chromium plating
- 4.Accuracy
-
A：Standard grade
B：Premium grade
- 5.Mounting hole
-
F：Side mount hole only (standard)
Y: Side mount hole＋ Tap at bottom surface *Models 10 and 12 are F only.
- 6. Length of Cam Rack
- Please refer to the dimension table.(Catalog: P14）*Can also handle short rack cuts not specified in the dimension table.
Cam Rack Connection Jig
- CJ
- 1
- 10A
- 2
- 1. Product Name
- CJ series
- 2.Frame number
- 10A、12A、16B、20B、25B、32B、40B
Specifications
ModelItems |
||
|---|---|---|
| Roller Pinion | ||
| Cam Rack | ||
| CPA / CRA series | CPC / CRC series | ||||||
|---|---|---|---|---|---|---|---|
| CPA1010B | CPA1210B | CPA1610B | CPA2010B | CPA2510B | CPA3212B | CPC3212A | CPC4012B |
| CRA1010A | CRA1210A | CRA1610A | CRA2010A | CRA2510A | CRA3212A | CRC3212A | CRC4012A |
| Common spec. | Basic dynamic rated load | N |
|---|---|---|
| Maximum working load | N | |
| Allowable static rated load | N | |
| Basic dynamic rated torque ＊1 | N・m | |
| Maximum working torque ＊1 | N・m | |
| Allowable static rated torque ＊1 | N・m | |
| Displacement distance of pinion per rotation | ㎜／revolution | |
| Max pressure angle | ° | |
| Module | ㎜ | |
| Roller Pinion | Number of tooth | teeth |
| Diameter of pitch circle ＊2 | ㎜ | |
| Mass weight | ㎏ | |
| Inertia moment | ㎏・㎡ | |
| Cam Rack | Pitch | ㎜ |
| Predetermined length | ㎜ | |
| Number of tooth | teeth | |
| Mass weight | ㎏ | |
| Outline Drawing | Roller pinion / Cam Rack | |
| Connection Jig | ||
| CAD Data | ||
| Catalog | ||
| Instruction Manual | ||
| 250 | 500 | 1000 | 1500 | 2200 | 3600 | 6000 | 15000 |
| 250 | 500 | 1700 | 2200 | 3100 | 6600 | 10500 | 18000 |
| 380 | 750 | 2000 | 3000 | 4400 | 7200 | 18900 | 26000 |
| 4.0 | 9.5 | 25.5 | 47.7 | 87.5 | 220 | 366.6 | 1146 |
| 4.0 | 9.5 | 43.3 | 70.1 | 123.4 | 403.3 | 641.5 | 1375.2 |
| 6.0 | 14.3 | 50.9 | 95.5 | 175.1 | 440 | 1150 | 1986.4 |
| 100 | 120 | 160 | 200 | 250 | 384 | 384 | 480 |
| 31 | 30.2 | 30.7 | 30.1 | 30.7 | 30.1 | 30.1 | 30.0 |
| 3 | 3.6 | 4.75 | 6 | 7.5 | 9.5 | 9.5 | 12 |
| 10 | 10 | 10 | 10 | 10 | 12 | 12 | 12 |
| 31.831 | 38.197 | 50.9 | 63.7 | 79.6 | 122.2 | 122.2 | 152.8 |
| 0.20 | 0.31 | 0.71 | 1.3 | 2.1 | 6.4 | 6.4 | 12.4 |
| 0.41×10-4 | 0.96×10-4 | 3.93×10-4 | 10.5×10-4 | 25.5×10-4 | 169×10-4 | 169×10-4 | 594×10-4 |
| 10 | 12 | 16 | 20 | 25 | 32 | 32 | 40 |
| 480 | 480 | 512 / 992 | 500 / 1000 | 500 / 1000 | 512 / 992 | 512 / 992 | 520 / 1000 |
| 48 | 40 | 32 / 62 | 25 / 50 | 20 / 40 | 16 / 31 | 16 / 31 | 13 / 25 |
| 0.6 | 0.6 | 1.1 / 2.2 | 2.1 / 4.2 | 2.7 / 5.4 | 4.2 / 8.4 | 4.2 / 8.4 | 6.9 / 13.8 |
＊1 Basic dynamic rated torque (maximum working torque, allowable static rated torque) is torque observed when applying basic dynamic rated load (maximum working load, allowable static rated load) to roller pinion along diameter formed by pitch circle
＊2 The indicated pitch circle diameter values are theoretical, not representing the actual pitch circle diameters of the respective roller pinions
Applications
TCG (Trochoid Cam Gear) Line-up
-
Full Ring & Roller Pinion
RGF&CPA / RFC&CPC series
- Frame number
-
RGF&CPA：1010、1210、1610、2510、3212
RFC&CPC：3212、4012
- Maximum working torque（N･m）
-
RGF&CPA：11～1930
RFC&CPC：1800～5300
-
Circular Arc Ring & Roller Pinion
RGD&CPA / RDC&CPC series
- Frame number
-
RGD&CPA：1610、2510、3212
RDC&CPC：3212、4012
- Maximum working torque（N･m）
-
RGD&CPA：585～6430
RDC&CPC：3800～17500
-
Ball Reducer with Roller Pinion
SFP-P series
- Frame number
- 70、85、100、125
- Reduction ratio
- 8～50
- Acceleration peak torque（N･m）
- 9.5～123.4
-
Full Ring Unit
RGU series
- Frame number
- 1610、2510
- Reduction ratio
- 40～625
- Maximum working torque（N･m）
- 143～1496
-
Circular Arc Ring Unit
RGU series
- Frame number
- 1610、2510
- Reduction ratio
- 150～1200
- Maximum working torque（N･m）
- 945～2270